BKSBV - FORM 17 894 SERIES POLYURETHANE VARNISH
- MSDS: BKSBV
- Manufacturer: DECRATEND PAINTS
- Product Name: FORM 17 894 SERIES POLYURETHANE VARNISH
- National Stock Number: 8010-00N016997
Product Identification
Product ID:FORM 17 894 SERIES POLYURETHANE VARNISH
MSDS Date:05/03/1988
FSC:8010
NIIN:00N016997
MSDS Number: BKSBV
Responsible Party
CITY OF INDUSTRY, CA 91746
US
Emergency Phone: 818-333-4592
Info Phone: 818-333-4592
Cage: HO890
Contractor
Telephone: 818-333-4592
Cage: 42590
Ingredients
8.0 @ 68 F.
CAS: 64742-95-6
Fraction By Weight: 10%
2-BUTOXYETHANOL
CAS: 111-76-2
RTECS: KJ8575000
OSHA PEL S, 50 PPM
ACGIH TLV: S, 25 PPM; 9293
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:VAPOR ODORS MAY CAUSE IRRITATION IN
THE UPPER AND LOWER RESPIRATORY TRACTS, NAUSEA, HEADACHES AND
DIZZINESS. EYE CONTACT: CAN CAUSE IRRITATION, REDNESS AND TEARING.
SKIN CONTACT: CAN CAUSE MINOR IRRIT ATION. INGESTION: CAN CAUSE
NAUSEA, VOMITING, DIARRHEA, AND GASTROINTESTINAL IRRITATION. ANIMAL
(SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: STUDIES HAVE CLEARLY DEMONSTRATED
DOSE-RELATED ADVERSE EFFECTS ON THE KIDNEYS, CNS, HEMATOPOIETIC
TISSUE, BLOOD, & LIVER ASSOCIATED WITH ADMINISRATION OF ETHYLENE
GLYCOL MONOBUTYL ETHER. (EX TRACTED FROM DHHS (NIOSH) PUB.NO.
90-118) .
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:IF AFFECTED BY VAPORS, MOVER PERSON TO FRESH AIR, APPLY
ARTIFICIAL RESPIRATION TO PERSON WHO LOSES CONCIOUSNESS AND CALL A
DOCTOR IMMEDIATELY. EYE: THOROUGHLY WASH WITH CLEAN WATER FOR AT
LEAST 15 MIN . IF IRRITATION PERSISTS SEE A DOCTOR IMMEDIATELY.
SKIN: THOROUGHLY WASH WITH CLEAN WATER. IF IRRIT PERSISTS SEE A
DOCTOR IMMEDIATELY. INGEST: DO NOT INDUCE VOMITING. CALL A DOCTOR
IMMEDIATELY.
Fire Fighting
Flash Point Method:TCC
Flash Point:105F,41C
Lower Limits:1.0 %
Extinguishing Media:FOAM, ALCOHOL FOAM, CO*2 AND DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . AVOID SPREADING BURNING LIQUID WITH WATER
USED FOR COOLING PURPOSES.
Unusual Fire/Explosion Hazard:LIQ EVAP & FORMS INVISIBLE VAPS WHICH
SPREAD EASILY & CAN BE IGNIT BY MANY SOURCE SUCH AS PILOT LIGHTS,
WELDING EQUIP, ELECT EQUIP, & ELEC SWITCHES.(SUPP DATA)
Accidental Release
Spill Release Procedures:DIKE OR ABSORB SPILLED MATERIAL WITH INERT
ABSORBENT MATERIAL SUCH AS SAND, EARTH AND SAWDUSTS. USE RAGS TO
CLEAN UP SMALL AMOUNTS OF SPILLED MATERIAL. REMOVE ALL IGNITION
SOURCES. VENTILATE CONFINED AREAS. KEEP PEOPLE AWAY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CNTNRS CLSD WHEN NOT USING. DO
NOT STORE/HNDL NEAR HEAT/FLAMES & STRONG OXIDANTS. STORE IN COOL
WELL VENT AREAS, ROTATE STOCK, USE (SUPP DATA)
Other Precautions:DO NOT STORE IN FREEZING AREAS, KEEP ABOVE 40 F. KEEP
OUT OF REACH OF CHILDREN.
Exposure Controls
Respiratory Protection:WEAR NIOSH/MSHA APPROVED ORGANIC VAPOR
RESPIRATOR UNLESS VENTILATION EQUIPMENT IS ADEQUATE TO KEEP
AIRBORNE CONCENTRATIONS BELOW THE EXPOSURE STANDARDS.
Ventilation:GEN MECHANICAL VENT MAY BE SUFFICIENT TO KEEP PRODUCT VAPOR
CONC BELOW SPECIFIED TLV RANGES. IF ADEQ, USE LOCAL EXHAUST.
Protective Gloves:IMPERMEABLE SOLVENT RESISTENT GLOVES
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:IMPERMEABLE APRONS & PROT CLTHG ARE ADVISED
WHEN WORKING W/THIS PROD. USE OF HEAD CAPS ARE REC WHENEVER
POSSIBLE.
Work Hygienic Practices:EYE WASHES AND SAFETY SHOWERS IN THE WORKPLACE
ARE RECOMMENDED.
Supplemental Safety and Health
EXPLO HAZ: FIRE HAZARD IS GREATER AS LIQUID TEMPERATURE RISES ABOVE 85
F. HNDLG/STORE PREC: OLDER MATERIAL FIRST. INSPECT FOR LEAKS IN ALL
CONTAINERS.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:310F,154C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:36
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS WILL SOFTEN OR DISSOLVE SOME PLASTIC AND RUBBER
PRODUCTS.
Stability Condition to Avoid:AVOID TEMPERATURES BELOW 40 F. AVOID
FREEZING.
Hazardous Decomposition Products:BURNING CAN PRODUCE CARBON DIOXIDE
AND/OR CARBON MONOXIDE.
Disposal
Waste Disposal Methods:COLLECT MATERIAL, CONTAMINATED ABSORBENT AND
RAGS INTO A DISPOSABLE CONTAINER AND DISPOSE OF IN ACCORDANCE TO
LOCAL, STATE AND FEDERAL REGULATIONS. CONSULT YOUR LOCAL HAZARDOUS
WASTE REGULATIONS REGAR DING LANDFILL DUMPING.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.